When looking for a ‘waterproof paint‘, you can find yourself in a bit of a minefield. Most paints claim to have some level of waterproofing properties and yes, most paints are waterproof in some way.
Glory Tang New Material supply professional and honest service.
However, there is one critical question that could cause your local vendor to shift sheepishly from foot to foot:
“I appreciate these paints are all waterproof, but just how waterproof?” Directly below we list the best waterproofing paints for different surfaces.
When it comes to clothes, there are definitive terms and guides; ‘Shower-resistant’, ‘Waterproof’, ‘Wetsuit’. But in the paint industry, we seem to be in somewhat murkier waters (pardon the pun). There isn’t a go-to chart we can refer you to, but what we can do is help you understand what level of waterproofing is needed for which type of project.
For simplicity’s sake, we will start with smaller, domestic projects and work our way up to thicker waterproofing.
If the exterior walls of your home need waterproofing paint, there are some ESSENTIALS you should be looking for from your masonry paint:
There are other excellent qualities you may look for, such as fungal protection, solvent-free, fast-curing and so on, to meet your tailored needs.
To make things easier, here are FOUR popular waterproofing paints for exterior walls in the Rawlins Paints product range:
Rust-Oleum’s esteemed Mathys Murfill range offers a waterproofing coating that is 100% waterproof, 400% elastic, colour protection from sunlight in even the darker shades, low odour and minimal VOCs, making it environmentally friendly.
The overriding selling point of Zinsser Watertite is it’s exceptional ability to stop up to 34psi of water pressure and provide mould and mildew protection. It can be applied to wet or dry surfaces, an unusual and exceptional trait, and boasts a recoating time of four hours.
I would recommend Murfil without hesitation, it is a brilliant paint which totally waterproofed our west facing walls and stopped all water ingress.
We have just done our chimneys too as this paint will outperform anything you can buy in a DIY store x10.
Available to tint in just about any colour you want too.
Rawlins customer feedback from Trustpilot
Zinsser Watertite is a waterproofing paint designed to be used on interior or exterior walls. However, there is a very important disclaimer to be addressed when treating interior walls.
Waterproofing a damp wall will not fix the problem.
Sealing up a damaged, damp wall with a waterproofing paint will not magically make the water disappear, it will lock it inside your wall to wreak further havoc. It’s a little like spilling wine at a party and putting newspaper over it – the issue hasn’t gone, you’ve obscured it.
We have a comprehensive blog on rising damp which explains the healing process.
As more stock is brought in for the Christmas rush – though applicable all year round – it is imperative to have your basements and storage areas correctly waterproofed and protected from mould and mildew. We have a blog specifically for waterproofing basements, cellars and stockrooms to assist you.
In this wonderful country we call ‘home’, waterproofing a roof properly with quality roof paints and coatings goes without saying. Do not at your peril!
Due to higher pollution levels, you should look to benefit from acid resistance in the rain and application in wet weather is useful. Again, climate change considered, elasticity is going to allow your roof’s compounds to “move” and adjust in high and low temperatures without cracking or blistering.
Rust-Oleum Mathys Fillcoat is an instantly waterproof, seamless, smooth liquid finish for roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. It seals small leaks quickly and simply, even in bad weather and is thick in texture. It is for immediate renovation and waterproofing that can be applied by brush, roller or spray.
APOC are roof paint specialists supplied from Rawlins Paints, so must get a mention in this segment. This professional grade roof coating has a 20 year protection guarantee and can be applied to a vast array of materials. If you have an issue with pooling water on a roof, APOC 576 Premium Silicone Roof Coating is ideal. If you have pooling on your roof, you do not need the same paint as the local swimming baths would.
For more detailed advice on repairing cladding panels and metal sheets, see the Rawlins guide.
In line with the theme of this blog, the waterproofing of floors will vary greatly depending on your environment. If you are looking to waterproof a domestic kitchen or varnish a wooden floor, you are looking at very different specifications to an industrial garage.
These three waterproofing coatings can be applied to concrete or cementitious flooring. They can be used on walkways, terraces, balconies, and stairways. For heavier use of mechanical equipment, the Resin Surfaces Limited (RSL) product would be better suited to the Sikafloor.
Our own Damp Proof Coating is a solvent-free, low odour primer/coating that offers excellent resistance to water, grease and oils (ideal for a garage). Its suppression of residual moisture created in construction makes it perfect for use in fast-track building programmes. It also comes in a decorative red!
Sikafloor 420 is a one part, moisture triggered polyurethane resin coating. Its UV protection and abrasion resistance makes it excellent for areas exposed to public footfall. It can also be exposed to low to medium mechanical exposure and is non-yellowing.
MVT is the faster-curing of the two Resuprime products brought to us by Resin Surfaces Limited. With an overcoat time of just 6 hours, it can be applied to substrates with hygrometer readings of up to 97%. It can be used where there either is not a Damp Proof Membrane (DPM), or it is ineffectual.
If it is a hygiene coating you are needing, that requires vigorous scrubbing on a regular basis, or a food-safe paint that offers waterproofing but to specific hygiene standards, please visit our recent blog on the differences, benefits and products we have to offer.
Whether it be fencing, panelling, decking, flooring or garden furniture, wood needs protection from the weather just like your concrete does. Waterproofing such as this however, is not to be confused with varnishing.
For a versatile waterproof paint for wood that can cover all the above bases, step forth one of our newer manufacturers!
This Hydron Protective System wood sealer can be applied to bare or rejuvenated wood to revive and protect. Clear in colour, it will not disrupt any current shade, is resistant to oil, wood, dirt and pollution, and has up to 10 years performance. It is even weather and UV resistant. What more could you want?
Varnishing wood is an excellent way to ensure a longer life for your furniture, panelling or flooring. It decreases the risk of abrasion and protects from dirt. If you are looking to do this, varnishes from Blackfriar and Coo-Var come as polyurethane, glaze, wax and more.
Furthermore, we have a blog to help you with varnishing too! There is a guide to varnishing floors, doors, windows and more.
Marine paints will give excellent protection to the underside of your boat and hull, as well as masts, superstructures, and deck work on both steel and wood. Teamac are a marine paints specialist and one of our manufacturers.
This glossy finish has excellent opacity and is suitable for general marine areas above the waterline; bridge fronts, deck work, masts and so on. It has superb adhesion and is available in a huge selection of colours making it decorative as well as waterproof.
This multipurpose primer offers resistance and protection both above and below the waterline, on prepared steel and wood. Like many of the other paints featured, it is flexible and hard-wearing, leaving a matt finish in unobtrusive metallic grey.
Teamac Antifouling D actively discourages the growth of barnacles, weeds and other water life that become attached on the submerged hull of the boat. It contains a high level of cuprious oxide and a blend of biocides to give good performance even on boats with speeds ranging from 25-30 knots. It is available in black, red, blue and green.
When it comes to substantial equipment that is subject to rigorous industry, a metal paint will provide greater protection from corrosion and the elements. They are around 5 times thicker and will protect metal from rust.
For those structures that are either immersed in water offshore or are prone to tidal splashing, a paint is needed which will be salt resistant, acid resistant and chemical resistant. The same applies to a swimming pool.
If you want to learn more, please visit our website Waterproof Painter Felt.
The Noxyde range from Rust-Oleum is a real crowd-pleaser. The Peganox product allows your structure to be virtually unaffected by time. It forms an anti-corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments.
The multi-talented Teamac rubber paint can be applied to metal, wood and asbestos. Its gloss finish and easy-to-clean nature makes it perfect for laundries, saunas, parlours and swimming pools. It also conveniently comes in a shade of light blue if it is a decorative protection you are looking for.
Interzone 954 is a modified epoxy barrier designed specifically for offshore splash zones. It is approved to NORSOK M501 for submerged areas, deck and splash zones, has good compatibility with sacrificial and impressed cathodic protection systems and has become popular in the offshore wind power market too.
If you are not sure which of the above waterproofing options is ideal for your project or wish to enquire about application, please do not hesitate to give Rawlins Paints’ technical team a call on (option 2), or you can on [ protected]. Further still, feel free to leave a query on the comments section below for our experts to review.
Cotton painter felt mats
Cotton painter felt mats are made from 100% cotton fibre, ensuring high absorption, softness and breathability. They are ideal for use in studios due to their organic feature and flexibility, which allows them to be easily modified into different forms. These mats are ideal for detailed work and high-quality paints.
Cotton polyester blend painter felt mats
A blend of cotton and polyester, these paints feel mats enjoy the features of both fibres - the total absorption of cotton and the durability of polyester. They are very hard and difficult to slip, making them appropriate for all kinds of projects. The diversity of this mat raises its functionality for both professional and amateur painters.
Polyester painter felt mats
Polyester painter felt mats are renowned for their durability and chemical resistance. They are less tough than cotton mats but sufficient for large work. They do not shrink and dry quickly; this makes them highly appropriate for those who utilize materials based on synthetic polymers.
Heavyweight painter felt mats
When it comes to size, these heavyweight mats are thick and heavy, greatly improving their absorption and durability, making them ideal for large painting projects. They are preferred by many workers who want a solid and stable surface while performing their work. They are good for both oil and acrylic paints due to their absorbency.
Custom-sized painter felt mats
Custom-sized painter felt mats are a modern demand. They are made to fill a certain space or fit a particular need. In such circumstances, specific blends of materials are used to create patterns on the painter mats. It opens a wide range of possibilities for the users, enabling them to place the mats in different designated spots and still maintain optimal functionality.
Functional design elements
The main purpose of a painter's felt mat is to deliver an ideal working area. They need to be non-slip so the painter's tools remain steady during the project. Certain mats have a double-sided feature where one side is better for absorbing paint while the other is more suited to fast drying. Some mats are designed with edging to prevent paint from spilling on areas outside the mat.
Color and texture
The practical aspects of painter mats also apply to their aesthetic features. The feeling of a painter mat can be significant for a painter's workplace: fine, smooth, natural fiber texture for an elegant touch. When it comes to coloring, there exists a large variety of color options, though many artists tend to select desaturated colors or earth tones so they may not interfere with the artwork. There are also patterned mats that can give the workspace extra personality.
Portability and storage features
Painter's felt mats are designed in a portable way. Most of them are foldable or rollable and can be easily carried from one position to another. This comes in handy for painters who work at different places or outdoors. Some mats come with carrying bags or straps for convenient transport.
Material composition
The composition of materials used for making the felt mat is one of the most critical features. If maximum absorption is required, cotton mats provide this, while polyester mats that are more flexible and durable are ideal for long-term use.
Size and thickness
The size of the mat should be large, depending on the working area that needs to be covered. It should not be very thick, as this may create an uneven surface, but neither should it be too thin, as this will reduce absorption capacity.
Surface texture and finish
The feel of the mat is important since it relates to how well the mat will hold materials and give a nice feel while doing work. Textured mats can provide a grip and rough surface that enables color to hold on better, while smooth mats can provide a more even workspace.
Ease of cleaning and maintenance
When working with materials such as brushes, the ease of cleaning and maintaining the painter's felt mat becomes very important. Some mats require more care, while others can be quickly dusted or washed without requiring complex procedures.
Budget considerations
Painter's felt mats come at diverse prices depending on the quality of materials used and craftsmanship. It's always a good idea to evaluate multiple options available and select the one that addresses individual needs without going over the planned expenditure.
Home studios
For painters who prefer to work at their convenience without shifting to another site, home studios are the best place to fix painter's felt mats. The comfort of this mat permits examination of different materials and painting techniques without damaging the floor or any other items.
Professional art studios
Many professionals working in art studios prefer custom and high-quality materials. They need painter felt mats for their workshops and studios, and these mats must be resistant to spills, simple to clean, and good for different types of paints. These mats create high-performance spaces in which art will be produced.
Art classes and workshops
When art classes and workshops use felt mats, learners are allowed to explore painting without the worry of making messes. Preparation of mats enables easy washing up and can be used for different students and styles.
Outdoor painting projects
For painters who love outdoor working, painter's felt mats become portable work surfaces. They act as a protective cover for the painter's gear and area, let them work inside without shifting things, and are easy to transport from one place to another.
Murals and large-scale projects
Often, when it comes to large works like murals, the actual touch-up involves a felt mat. The mat's extensive area provides the artist with enough space to mix colors and paint without interruptions. Heavyweight mats are most appropriate in such scenarios due to their resistance to any form of wear and tear.
For more Home Textile Nonwoven Fabricinformation, please contact us. We will provide professional answers.